Error

  • You need to be logged in to view that page.
  • You need to be logged in to view that page.
  • Forum topic: Development and designers

    Austria Lukas Fenninger Pitwall Administrator

    898 races

    31 championships

    122 wins

    374 podiums

    Current team

    Austria Fenninger Racing
    Division 1

    You can research until unsure, then do a design, works perfectly fine (with or without unassigning staff).
    Just keep in mind, research levels drop over time, its not rapid, but its steady. So reserch and then dev, you should be fine!
    October 8, 2017 05:26 pm
    +0

    Croatia Stephen Whitener

    80 races

    0 championships

    1 wins

    9 podiums

    Current team

    Thanks again! :)
    October 8, 2017 05:29 pm
    +0

    United Kingdom Daniel Stevens

    Search YouTube for MCDXCOM

    408 races

    7 championships

    29 wins

    94 podiums

    Current team

    research is the max a part can be no matter how good head designer is - but yes you still want the assistant as this will help to actually design a part to the max level - this max level will prob be the potential of the part
    October 9, 2017 12:22 pm
    +0

    United Kingdom Matthew Alvis

    Weymouth

    36 races

    0 championships

    2 wins

    15 podiums

    Current team

    When designing a new part (which you have to do for each new season at the moment) you need the best research level to get the best potential part. However when basing a design on a previous one, it uses the same research rating as it was when you made the original part. It is a waste of money and time to do research when doing a based on design
    October 26, 2017 06:39 am
    +0

    Austria Lukas Fenninger Pitwall Administrator

    898 races

    31 championships

    122 wins

    374 podiums

    Current team

    Austria Fenninger Racing
    Division 1

    Yes, but keep in mind that based on is only working for in season dev. If you are doing a based on part for next season, you still need to research as it will be a brand new part non the less.
    October 26, 2017 04:21 pm
    +0

    Croatia Stephen Whitener

    80 races

    0 championships

    1 wins

    9 podiums

    Current team

    How does making parts for next season that are based on parts from current one work?

    If i have, lets say, okay research in both season, will new season part be improvement on old season part with same/new potential or what?

    What is different between making new season part based on old one and making brand new one?
    November 3, 2017 01:26 pm
    +0

    Austria Lukas Fenninger Pitwall Administrator

    898 races

    31 championships

    122 wins

    374 podiums

    Current team

    Austria Fenninger Racing
    Division 1

    Based on is not working at all (it was working a few seasons ago, then happened a development overhaul, since then it is not working). So you have to research for every brand new part.

    So for next season you research, and then design a brand new part.

    EDIT: if you select based on for next season, it's still going to be a brand new part. So you still need to research before and the outcome is the same.
    November 3, 2017 04:16 pm
    +0

    Finland Tommi

    852 races

    20 championships

    100 wins

    288 podiums

    Current team

    Hi,
    have you guys tested if it matters how many designers are assigned when doing testbed?
    November 12, 2017 10:13 am
    +0

    Japan Robert Bouchard

    Shinshiro, Aichi, Japan

    419 races

    5 championships

    16 wins

    94 podiums

    Current team

    Nope, I have never tested this aspect as once I sent my designers then I leave them alone through the different phases. I would assume that if 20 was the fastest way to design and develop then it would also be the same for test bed.
    November 13, 2017 04:46 am
    +0

    Croatia Stephen Whitener

    80 races

    0 championships

    1 wins

    9 podiums

    Current team

    Also, if you start design, but then research 1 more level, will it affect that part that is being designed or you have to start from scratch?
    November 16, 2017 12:13 am
    +0

    Reply

    Error

    Guests can't post in the forum. Please sign in to be able to post in the forums.